Your blog category
Shelf life:- Time of storage under stated conditions during which an adhesive is expected to maintain its working properties. Maturing time:- Interval between the time when the cementitious adhesive is mixed and the time when it is ready for use. pot-life:– Maximum time interval during which the adhesive can be used after mixing. Open time:- Maximum …
Reason Hollowness behind the tiles Falling of heavy object Expansion and contraction Tiling with Cement Poor tiles material Solution Use Adhesive in place cement Proper tile application as per the manufacturer’s instruction. Good quality tiles Take care of heavy loads.
Classification of ceramic tiles with respect to water absorption (E) and shaping, from BS EN 14411:2006 Groups AIIA and AIIb are divided into two parts (Parts 1 and 2) with different product specifications. Part 1 covers most of the tiles in the group; Part 2 covers certain specific products, which are manufactured under different names …
Classification of ceramic tiles with respect to water absorption (E) and shaping Read More »
Epoxy Grout in a swimming pool area :- Before grouting joints, check that tiles have been fixed correctly and are anchored perfectly to the surface. Surfaces must be perfectly dry. Surface Considerations Before grouting joints, check that tiles have been fixed correctly and are anchored perfectly to the surface. Surfaces must be perfectly dry. The joints …
How to apply an Epoxy Grout in a swimming pool area Read More »
Tensile adhesion strength of Tile Adhesive BS EN 12004 : Test conditions :- • (23 ± 2) °C and (50 ± 5) % relative humidity • Test materials :- • Condition all test materials to be tested for at least 24 h under standard conditions. • Type of tile: type V1: dry pressed ceramic …
How to check Tensile adhesion strength of Tile Adhesive Read More »
This practice covers suggested procedures for preparing bare, solid metal specimens for tests, for removing corrosion products after the test has been completed, and for evaluating the corrosion damage that has occurred. Significance and Use The procedures given are designed to remove corrosion products without significant removal of base metal. This allows an accurate determination …
ASTM G1 :- Preparing, Cleaning, and Evaluating Corrosion Test Specimens Read More »
Preparation of test pieces Apply the liquid water impermeable product to the surface of the substrate material should be applied in two or more layers, inserting if requested a reinforcing cloth or mesh. With some products, a sprinkling of silica sand into the top layer is required to improve adhesion to the surface. Before applying …
BS EN 14891 :- Tensile adhesion strength after freeze-thaw cycle Read More »
Adhesive :- We can use Reaction resin based adhesive (R2T) to fixed Glass types tiles on metal surfaces.
IS 15477 : 2019 :- This standard prescribes the requirements for adhesives used for fixing tiles of different porosity and classifies the tile adhesive into different types suitable for their proposed application. Classification of IS 15477 : 2019 The adhesive shall be classified into 5 types and the recommended application of these types of adhesive …
Difference between IS 15477 & EN 12004 Standards Read More »
Objective :- Determining the time of efflux of a specified volume of fluid hydraulic cement grout through a standardized flow cone and used for preplaced-aggregate (PA) concrete. Testing Procedure :- Grout Flow Cones measure the flow ability of hydraulic grout used in preplaced aggregate concrete. In the other hand Flow ability is measured by time …
ASTM C 939 – Time of Flow of fluid hydraulic cement grout Read More »
